
Rear LH RH Tailgate Power Lift Support for Ford Edge for Lincoln MKX 2011-2015
- for Ford Edge 2011-2015
- for Lincoln MKX 3.7L 2011-2015
- OE Number:BT4378402A55AL/BT4378402A55AJ/BT4378402A55AK
- Material: Carbon Steel
- Extended Length: 62.5cm / 24.61"
- Install Place: Rear Left Right
- Include 1x Tailgate Power Lift Support
- This Shocks for Rear Hatch will be aging, cracking, rusty connector etc. after long-term use.
- Replace rear hatch struts kit when the trunk door have noisy sound or clunky that hard to open and close.
- Instead of manually operate, this electric tailgate lift relying an actuator and plug to achieve remote control by key fob, built-in electric motor will driving and guide the electric strut to extend or contract.
- This is a non-OEM product, accessory only!
- 1. Keep the tailgate door open on max height and remove inner trim panel.
- 2. Unplug the plug, use tools to loose the old spherical joint and insert new one.
- 3. Plug the liftgate plug and recover the inner trim panel.
- 4. Use diagnostic scanner to clear error code, just use scanner to clear if show negative/occasional; replace the lift struts if show permanent.
- 5.Confirm the L/R mark on struts before install it on your tailgate.
- 1. Push the trunk close button.
- 2. Close the tailgate by hand slowly and push the trunk open button.
- 3. Use diagnostic scanner to reset control module and push trunk close button.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
- for Ford Edge 2011-2015
- for Lincoln MKX 3.7L 2011-2015
- OE Number:BT4378402A55AL/BT4378402A55AJ/BT4378402A55AK
- Material: Carbon Steel
- Extended Length: 62.5cm / 24.61"
- Install Place: Rear Left Right
- Include 1x Tailgate Power Lift Support
- This Shocks for Rear Hatch will be aging, cracking, rusty connector etc. after long-term use.
- Replace rear hatch struts kit when the trunk door have noisy sound or clunky that hard to open and close.
- Instead of manually operate, this electric tailgate lift relying an actuator and plug to achieve remote control by key fob, built-in electric motor will driving and guide the electric strut to extend or contract.
- This is a non-OEM product, accessory only!
- 1. Keep the tailgate door open on max height and remove inner trim panel.
- 2. Unplug the plug, use tools to loose the old spherical joint and insert new one.
- 3. Plug the liftgate plug and recover the inner trim panel.
- 4. Use diagnostic scanner to clear error code, just use scanner to clear if show negative/occasional; replace the lift struts if show permanent.
- 5.Confirm the L/R mark on struts before install it on your tailgate.
- 1. Push the trunk close button.
- 2. Close the tailgate by hand slowly and push the trunk open button.
- 3. Use diagnostic scanner to reset control module and push trunk close button.























